Dell Latitude E6400 XFR (Mid 2008) - Manual (Page 71)

Dell ™ Latitude™ E6400 XFR Service Manual
Page 71
3. Remove the two VGA Connector socket screws.
4. Place a scribe in the small opening and pull to remove.
37.16 Replacing the VGA Panel Cover
1. Place the VGA Panel Cover in place over the VGA port.
2. Replace the two VGA connector socket screws.
3. Follow the procedures in After Working on Your Computer.
37.17 Removing the HDD Door
Parts Location
1 Door 2 M3 x3 mm (2)
1. Follow the procedures in Before Working on Your Computer.
2. Open the door to relieve hinge pressure.
3. Remove the two M3 x 3-mm screws from the bottom of the base assembly
37.18 Replacing the HDD Door
1. Insert door hinge onto assembly and align the hinge divots.
2. Replace the two M3 x 3-mm screws.
2
1