Dell Latitude E6400 XFR (Mid 2008) - Manual (Page 40)

Dell ™ Latitude™ E6400 XFR Service Manual
Page 40
3. After the middle is separated from the palm rest, peel the overlay from middle to left.
4. With the left half of the overlay removed, begin to work your way from middle to right.
16.2 Replacing the Palm Rest Overlay
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Remove the palm rest overlay adhesive protector.
2. Align the right side of the palm rest overlay in the palm rest groove ensuring the finger print reader (optional)
is properly aligned.
3. Working your way from right to left, continuously press the overlay into place and ensure that it stays in the
palm rest groove.
4. Follow the procedures in After Working on Your Computer.
17 Keyboard
17.1 Removing the Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the safety
instructions that shipped with your computer.
1. Follow the procedures in Before Working on Your Computer.
2. Remove the LED cover (see Removing the LED Cover).
3. Remove the palm rest overlay (see Removing the Palm Rest Overlay).
4. Loosen the two M2.5 x 9.85-mm captive screws along the bottom of the keyboard in the keyboard bracket.