Dell Alienware Area 51 R2 (Late 2014) - Manual (Page 113)

Removing the Logo Board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot .
2 Remove both the left and right side-panels. See “ Removing the Side
Panels ”.
3 Remove the memory fan .
Procedure
NOTE: Note the routing of all cables as you remove them so that you can
reroute them correctly after you replace the logo board.
1 Lay the chassis on the left side.
2 Disconnect all the cables from the connectors on the logo board.
3 Remove the screw that secure the logo board to the chassis.
113