Removing the stability foot, Procedure – Dell Alienware Area 51 R2 (Late 2014) User Manual
Page 22
Advertising
Removing the Stability Foot
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before Working Inside Your Computer
After working inside your computer, follow the instructions
in
After Working Inside Your Computer
. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Tilt the computer towards the front until the base is facing up.
2 Remove the screws that secure the stability foot to the computer.
22
Advertising