Dell Alienware Area 51 R2 (Late 2014) - Manual (Page 70)

Removing the Multiple
Graphics Cards
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot .
2 Remove both the left and right side-panels. See “ Removing the Side
Panels ”.
Procedure
1 Lay the chassis on the left side.
2 Locate the graphics cards (PCI-Express x16 card) on the system board. For
more information on the graphics card connector, see “ System Board
Components ”.
70