Dell Alienware Area 51 R2 (Late 2014) - Manual (Page 54)

Removing the I/O Board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before Working Inside Your Computer .
After working inside your computer, follow the instructions
in After Working Inside Your Computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the Side Panels ”.
Procedure
1 Lay the system on the right side.
54