Replacing the drive-panel insert, Replacing the drive panel – Dell Dimension 9100 User Manual
Page 84
Advertising
84
Removing and Installing Parts
www
.dell.com | support.dell.com
Replacing the Drive-Panel Insert
1 Slide the tab on the left side of the drive-panel insert under the center drive panel tab.
2 Rotate the drive-panel insert into place and snap the drive-panel insert tab over the
corresponding tab on the drive panel.
3 Ensure that the drive-panel insert is correctly seated in the drive panel.
Replacing the Drive Panel
1 Follow the procedures in "Before You Begin" on page 55.
center drive-
panel tab
drive-panel
insert tab
drive panel
drive-panel insert
Advertising