Dell Dimension 9100 - Manual (Page 85)

Removing and Installing Parts
85
2 Align the drive panel tabs with the side-door hinges.
3 Rotate the drive panel toward the computer until the sliding plate lever clicks into place and
the drive panel snaps into place on the front panel.
Drives
Your computer supports:
• Two hard drives (Serial ATA)
• Two FlexBay drives (can contain an optional floppy drive or optional Media Card Reader)
• Two CD or DVD drives
General Installation Guidelines
Connect hard drives to the connector labeled "SATA" and connect CD/DVD drives to the
connector labeled “IDE".
drive panel
sliding plate
sliding plate lever