User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual
Page 121
USER’S GUIDE
Mete
red Rac
k
PDU
118
Transferring the file to a single Rack PDU.
To transfer the .ini file to another Rack
PDU, do either of the following:
• From the Web interface of the receiving Rack PDU, select the
Administration
tab,
General
on the top menu bar, and
User Config File
on the left navigation menu.
Enter the full path of the file, or use
Browse
.
• Use any file transfer protocol supported by Rack PDUs, i.e., FTP, FTP Client, SCP, or
TFTP. The following example uses FTP:
a. From the folder containing the copy of the customized .ini file, use FTP to log in
to the Rack PDU to which you are exporting the .ini file:
ftp> open ip_address
b. Export the copy of the customized .ini file to the root directory of the receiving
Rack PDU:
ftp> put filename.ini
Exporting the file to multiple Rack PDUs.
To export the .ini file to multiple Rack
PDUs, use FTP or SCP, but write a script that incorporates and repeats the steps used
for exporting the file to a single Rack PDU.