User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual
Page 160
USER’S GUIDE
Mete
red Rac
k
PDU
157
Load the host key to the Rack PDU.
1. On the
Administration
tab, select
Network
on the top menu bar, and
ssh host
key
under the
Console
heading on the left navigation menu.
2. Select
Add or Replace Host Key
, and browse to the host key, the
.p15
file you
created in the procedure
. (The default location is
C:\Program Files\Dell\Rack PDU Security Wizard
.)
3. At the bottom of the
User Host Key
page, note the SSH fingerprint. Log on to
the Rack PDU through your SSH client program, and verify that the correct host
key was uploaded by verifying that these fingerprints match the fingerprints that
the client program displays.
Alternatively, you can use FTP or Secure CoPy (SCP) to transfer the host key
file to the Rack PDU. For SCP, the following command would transfer a host
key named
hostkey.p15
to a Rack PDU with an IP address of 156.205.6.185:
scp hostkey.p15 [email protected]