Radius, User’s guide, Mete red rac k pdu – Dell Metered PDU LED User Manual
Page 168
USER’S GUIDE
Mete
red Rac
k
PDU
165
RADIUS
To configure RADIUS, on the
Administration
tab, select
Security
on the top menu
bar. Then, under
Remote Users
on the left navigation menu, select
RADIUS
.
If two configured servers are listed and
RADIUS, then Local Authentication
or
RADIUS Only
is the enabled authentication method, you can change which RADIUS
server will authenticate users by clicking the
Switch Server Priority
button.
Setting
Definition
RADIUS
Server
The server name or IP address of the RADIUS server.
N
OTE
:
RADIUS servers use port 1812 by default to authenticate users. To use a
different port, add a colon followed by the new port number to the end of the
RADIUS server name or IP address
.
Secret
The secret shared between the RADIUS server and the Rack PDU.
Reply
Timeout
The time in seconds that the Rack PDU waits for a response from the RADIUS
server.
Test
Settings
Enter the Administrator user name and password to test the RADIUS server path
that you have configured.
Skip Test
and Apply
Do not test the RADIUS server path.