Dell Metered PDU LED - Manual (Page 79)

USER’S GUIDE
Mete
red Rac
k
PDU
76
Administration: Security
Local Users
Setting user access
Path: Administration > Security > Local Users > options
The Administrator user account always has access to the Rack PDU.
The Device User and Read-Only User accounts are enabled by default. To disable the
Device User or Read-Only User accounts, select the user account from the left
navigation menu, then clear the
Enable checkbox.
You set the case-sensitive user name and password for each account type in the same
manner. Maximum length is 10 characters for a user name and 32 characters for a
password. Blank passwords (passwords with no characters) are not allowed.
For information on the permissions granted to each account type
(Administrator, Device User, and Read-Only User), see
Types of user
accounts .
Account Type Default User Name Default Password Permitted Access
Administrator admin admin Web interface and command
line interface
Device User device device
Read-Only User readonly readonly Web interface only