Esx/esxi host settings – Dell PowerVault MD3200i User Manual
Page 15
Figure 9. Site Recovery Manager Advanced Settings
2.
Click storage and set the following values:
– storage.commandTimeout = 900
– storageProvider.hostRescanRepeatCnt = 2
– storageProvider.hostRescanTimeoutSec = 900
3.
Click OK to save your changes.
4.
Click storageProvider and set the following values:
storageProvider.fixRecoveredDatastoreNames = enabled
ESX/ESXi Host Settings
The following changes are recommended for ESX/ESXi host settings:
•
Disk.MaxLUN — Set this value slightly larger than the number of LUNs mapped to the ESX/ESXi host. This
provides faster rescan operations by not scanning all 256 LUN possibilities.
•
Disk.UseDeviceReset = 1
and
Disk.UseLunReset = 0
Disk.UseDeviceReset and Disk.UseLunReset are used together to indicate how device resets are
issued.
15