Dell Precision 360 - Manual (Page 12)

I/O Panel: Dell Precision 360 Service Manual
file:///C|/infodev/2013/eDoc/ws360/SM/iopnl.htm[2/18/2013 12:39:36 PM]
1 chassis-intrusion switch connector 6 headphone connector
2 speaker connector
7 USB 2.0 connector
3 audio connector 8 USB 2.0 connector
4 front-panel connector 9 diagnostic lights (4)
5 control-panel connector
Removing the I/O Panel
1. Remove the front panel .
2. Disconnect all cables that are connected to the I/O panel.
Note the routing of the control panel cable as you remove it from the computer so that you can replace it correctly.
3. From inside the computer cover, remove the mounting screw that secures the I/O panel to the computer.
4. Remove the I/O panel from the computer.
Mini-Tower Computer