Dell Precision 360 - Manual (Page 7)

Inside Your Computer: Dell Precision 360 Service Manual
file:///C|/infodev/2013/eDoc/ws360/SM/inside.htm[2/18/2013 12:39:34 PM]
(FRONT_PANEL)
8 standby power light
(PWR_LED)
21 rear fan connector (REAR_FAN2)
9 internal speaker (SPKR) 22 microprocessor and heat-sink connector (CPU_0 PIN_#A1)
10 clear CMOS jumper (CMOS) 23 microprocessor fan connector (CPU_FAN)
11 serial ATA connector
(SATA_1)
24 memory module connectors (1, 3)
12 front fan (FRONT_FAN) 25 power connector (PWR)
13 serial ATA connector
(SATA_0)
26 memory module connectors (2, 4)
Jumper Settings
NOTICE: Ensure that your computer is turned off and unplugged before you change the jumper settings. Otherwise,
damage to your computer or unpredictable results can occur.
To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated.
Jumper Setting Description
PSWD
(default)
Password features are enabled.
Password features are disabled.
CLR_CMOS
(default)
Clears the CMOS settings
Normal CMOS function