Dell DR4000 - Manual (Page 10)

10 Setting Up Dell™ DR Series Deduplication Appliance as Backup Target on CommVault SimpanaTM 10 | January 2014
11. Enter a Container Name, select the Enable CIFS or Enable NFS check box. Symantec NetBackup
supports both CIFS and NFS protocols.
12. Select the preferred client access credentials.
Note: For improved security, Dell recommends adding IP addresses for the following (Not all
environments will have all components): Backup console (CommVault Server, CommVault Media Agents)
Name the container
Select CIFS or NFS
Enter Backup Server Info
Name the container
Select CIFS or NFS
Enter Backup Server Info