Dell 2300 Wireless Broadband Router - Manual (Page 166)

NOTE: Make sure the file you choose is an actual Dell TrueMobile 2300 Wireless Broadband Router firmware file.
Click the START button when you have chosen a file. After the firmware is written to the Wireless Broadband Router, the
home page will be loaded automatically. While the Wireless Broadband Router resets, the Power light on the front panel of the
unit blinks.
Back to Top
Reset Device
Use the Reset Device function if a system failure occurs. This feature does not reload the factory default settings. It simply
resets the device to the network settings that existed on the device before the system failure occurred. This is equivalent to
unplugging the device and plugging it back in or pressing the reset button for less than 3 seconds until the Power light start to
blinks. No settings are lost.
NOTICE: If you were in the process of updating the network settings, those changes are lost when the device
is reset.
Click the START button to reset the Wireless Broadband Router to its current firmware settings. While the Wireless
Broadband Router is reset, the Power light on the front of the unit blinks.
Back to Top
Back to Contents Page