Dell 2300 Wireless Broadband Router - Manual (Page 50)

Back to Contents Page
xDSL Modem Connection
NOTE: It's recommended that you install the router for Internet connectivity with the Setup Wizard provided on the
TrueMobile 2300 CD.
Perform the below installation steps only when you are unable to install the router with the Setup Wizard for Internet
connectivity.
xDSL without PPPoE - Standard Setup
Use this setup when your DSL service provider does not ask you to enter any information for your Internet
Broadband connection.
xDSL with PPPoE
Use this setup if your ISP has given you a username and password for your Internet Broadband connection.
xDSL without PPPoE - Standard Setup
1. Connect the Ethernet port on the DSL modem to the Internet port on the router via an Ethernet cable.
2. Connect any one of the four LAN port on the router to the Ethernet port on your computer via another Ethernet cable.
(Connect to the router from your PC with a wireless network adapter.)
3. Power on the router.
4. The setup should work on the router with factory default settings.
NOTE: If the installation is not successful because you have modified any setting or due to other factors, you can
restore the default settings by push the Reset button at the side of the router for at least 2 seconds. The router