Coin-cell battery, Removing the coin-cell battery, Replacing the coin-cell battery – Dell Inspiron Mini Duo (1090, Late 2010) User Manual
Page 11
Back to Contents Page
Coin-Cell Battery
Dell™ Inspiron™ 1090 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1.
Follow the instructions in
Before You Begin
.
2.
Remove the label door (see
Removing the Label Door
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the palm-rest assembly (see
Removing the Palm-Rest Assembly
).
5.
Remove the battery (see
Removing the Battery
).
6.
Remove the memory module (see
Removing the Memory Module
).
7.
Use a plastic scribe and gently pry the coin-cell out of the battery socket on the system board.
8.
Lift the coin-cell battery out of the system board socket.
Replacing the Coin-Cell Battery
1.
Follow the instructions in
Before You Begin
.
2.
With the positive side up, snap the coin-cell battery into the battery socket on the system board.
3.
Replace the memory module (see
Replacing the Memory Module
).
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
plastic scribe
2
coin-cell battery