Replacing the display assembly – Dell Inspiron Mini Duo (1090, Late 2010) User Manual

Page 16

Advertising
background image

 

11.

Remove the two screws that secure the display assembly to the computer base.

 

12.

Lift the display assembly off the computer base.

 

Replacing the Display Assembly

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.

 

3.

Route the ambient-light sensor cable, touch-screen cable, display cable, and camera cable through the routing guides.

 

4.

Connect the ambient-light sensor cable, touch-screen cable, display cable, and camera cable to their connectors on the system board.

 

5.

Route the Mini-Card antenna cables through the routing guides.

 

6.

Connect the appropriate antenna cables to the Mini-Cards(s) on your computer (see

Replacing the Mini-Card(s)

).


 

7.

Replace the memory module (see

Replacing the Memory Module

).


 

8.

Replace the battery (see

Replacing the Battery

).


 

9.

Replace the palm-rest assembly (see

Replacing the Palm-Rest Assembly

).


 

1 ambient light-sensor cable connector

2 touch-screen cable connector

3 display cable

4 camera-cable connector

1

display assembly

2

screws (2)

Advertising