Speakers, Removing the speakers, Replacing the speakers – Dell Inspiron Mini Duo (1090, Late 2010) User Manual
Page 41
Back to Contents Page
Speakers
Dell™ Inspiron™ 1090 Service Manual
Removing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Remove the system board (see
Removing the System Board
).
3.
Remove the two (one on each speaker) screws that secure the speakers to the computer base.
4.
Lift the speakers along with their cable off the computer base.
Replacing the Speakers
1.
Follow the instructions in
Before You Begin
.
2.
Place the speakers on the computer base and route the speaker cable through the routing guides.
3.
Replace the two screws that secure the speakers to the computer base.
4.
Replace the system board (see
Replacing the System Board
).
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1 speakers (2)
2 speaker cable routing
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.