Dell Inspiron Mini Duo (1090, Late 2010) - Manual (Page 24)

10. Remove the four screws that secure the hard drive to the hard-drive bracket.
11. Lift the hard-drive bracket away from the hard drive.
Replacing the Hard-Drive Assembly
1. Follow the instructions in Before You Begin .
2. Remove the new hard drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
3. Place the hard drive in the hard-drive bracket.
4. Replace the four screws that secure the hard drive to the hard-drive bracket.
5. Place the hard-drive assembly in the computer base.
6. Push the hard-drive assembly towards the left to connect it to the connector on the system board.
7. Replace the screw that secures the hard-drive assembly to the computer base.
8. Replace the memory module (see Replacing the Memory Module ).
9. Replace the battery (see Replacing the Battery ).
10. Replace the palm-rest assembly (see Replacing the Palm-Rest Assembly ).
11. Replace the keyboard (see Replacing the Keyboard ).
12. Replace the label door (see Replacing the Label Door ).
Back to Contents Page
3 screw
1 hard-drive bracket 2 screws (4)
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.