Dell 7130cdn Color Laser Printer - Manual (Page 48)

Printing
Dell 7130cdn Professional Color Printer
User Guide 48
4. When the control panel prompts you to confirm the type and size of paper in the tray, press
the OK button to use the current tray setup. If you loaded a new size or type of paper in the
tray, do the following:
a. Select Change setup, then press the OK button.
b. Select the appropriate paper type, then press the OK button.
c. Select the appropriate paper size, then press the OK button. For some sizes that can be
loaded in either direction, you need to select the size with the letters LEF (Long-Edge
Feed). If you loaded a custom paper size, select it if it is already defined. If not, select
New Custom Size for the paper size and follow the prompts; see
Using Custom Size
Paper on page 62 for more information.
Short-Edge Feed
Use short-edge feed for sizes that do not fit long-edge feed or when the media curls or peels, such as
labels.
1. Open Tray 1 (MPT).
2. Load the paper or other media with the short edge against the printer.
• For single-sided printing, place side one face down, with the top of the page entering
the printer first. Pre-punched holes should be at the front of the printer.
7130-036
7130-123