Dell Inspiron 8200 - Manual (Page 78)

Removing the Mini PCI Card
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Remove the M2.5 x 20-mm screw and then remove the Mini PCI card cover.
3. To release the Mini PCI card, spread the metal securing tabs until the card pops up slightly.
4. Disconnect the card from the internal antenna.
5. Lift out the card and disconnect any attached cables.
Replacing the Mini PCI Card
1. Align the Mini PCI card with the socket at a 45-degree angle, and press the Mini PCI card into the socket.
2. Connect the internal-antenna cable to the primary-antenna connector on the card.
3. Pivot the Mini PCI card down until it clicks into place.
4. Replace the Mini PCI card cover and the M2.5 x 20-mm screw.
Back to Contents Page
1 M2.5 x 20-mm screw
NOTICE: The connectors are keyed for correct insertion; do not force the connections.
1 internal-antenna cable
2 primary-antenna
connector on card