System fan – Dell Latitude D530 (Early 2008) User Manual
Page 17
Back to Contents Page
System Fan
Dell™ Latitude™ D530 Service Manual
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the palm rest (see
Removing the Palm Rest
).
3.
Remove the two M2.5 x 5-mm screws from the fan, and then remove the connector that connects the fan to the system board
Back to Contents Page
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
1 M2.5 x 5-mm screws (2) 2 fan 3 fan connector
4 system board connector