Speaker assembly, Removing the speaker assembly, Replacing the speaker assembly – Dell Latitude D530 (Early 2008) User Manual
Page 43
Back to Contents Page
Speaker Assembly
Dell™ Latitude™ D530 Service Manual
Replacing the Speaker Assembly
Removing the Speaker Assembly
1.
Follow the instructions in
Before You Begin
.
2.
Remove the hard drive (see
Removing the Hard Drive
).
3.
Remove the hinge cover (see
Hinge Cover
).
4.
Remove the keyboard (see
Removing the Keyboard
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the palm rest (see
Removing the Palm Rest
).
7.
Disconnect the speaker cable connector from the system board and remove the M2.5 x 5-mm screw from the speaker assembly.
8.
Remove the speaker assembly.
Replacing the Speaker Assembly
1.
Align the speaker assembly on the screw holes for securing the assembly to the computer base.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTICE:
Handle the speakers with care to help prevent damage to them.
1 speaker cable connector 2 M2.5 x 5-mm screw
3 speaker assembly
4 speaker cable connector on system board
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.