Dell PowerVault NX3000 - Manual (Page 11)

2
Deployment Issues
The following section discusses various deployment issues.
Default Password Missing
Description Unable to find the default password of the system.
Workaround/Solution The default password for your PowerVault storage solution is Stor@ge!
Errors Due To PERC Cards
Description This error is caused due to the PERC cards.
Workaround/Solution To resolve the issue, see the PERC documentation at support.dell.com/manuals.
Firewall Exceptions On PowerVault Systems
Description These are the default firewall settings configured on PowerVault NAS systems.
The following ports are open by default:
• UDP port = 80: http
• UDP port = 111: Portmap UDP
• UDP port = 162: SNMP
• UDP port = 1071
• UDP port = 137: NetBIOS Name
Service — UDP port = 138: NetBIOS
Datagram service:
• UDP port = 328:
• UDP port = 6389:
• UDP port = 1205:
• UDP port = 1062:
• UDP port = 2730:
• TCP port = 80: IIS
• TCP port = 135: RPC
• TCP port = 3260: ISCSI
• TCP port = 111: Portmap TCP
• TCP port = 25: Storage Processor
• TCP port = 4244: DCOM/RPC
11