Operating method, Installation / moving, Caution – Dell 1130 Laser Mono Printer User Manual

Page 7: Warning

Advertising
background image

This could result in electric shock or fire.

Call an electrician to change the electrical outlet, or this

could result in electric shock.

Be careful, the paper output area is hot.

Burns could occur.

Do not allow pets to chew on the AC power, telephone or

PC interface cords.
This could result in electric shock or fire and/or injury to your

pet.

If the machine has been dropped, or if the cabinet

appears damaged, unplug the machine from all

interface connections and request assistance from

qualified service personnel.
Otherwise, this could result in electric shock or fire.

If the machine does not operate properly after these

instructions have been followed, unplug the machine from all

interface connections and request assistance from qualified

service personnel.
Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change

in performance, unplug the machine from all interface

connections and request assistance from qualified

service personnel.
Otherwise, this could result in electric shock or fire.

Operating method

Caution

Do not forcefully pull the paper out

during printing.
It can cause damage to the

machine.

When printing large quantities, the bottom part of the

paper output area may get hot. Do not allow children to

touch.
Children may be burned.

Be careful not to put your hand

between the machine and paper

tray.
You may get injured.

When removing jammed paper, do not use tweezers or

sharp metal objects.
It can cause damage to the machine.

Do not block or push objects into the

ventilation opening.
This could result in elevated component

temperatures which can cause damage or fire.

Do not allow too many papers to stack up in the paper output tray.

It could cause damage to the machine.

Use care to avoid paper cuts when replacing

paper or removing jammed paper.
You may get hurt.

This machine's power interception device is the power cord.

To switch off the power supply, remove the power cord from the

electrical outlet.

Installation / Moving

Warning

Do not place the machine in an area with dust, humidity or water leaks.
This could result in electric shock or fire.

Caution

When moving the machine, turn

the power off and disconnect all

cords; then lift the machine with

at least two people.

The machine could fall, causing human injury

or machine damage.

Do not put a cover over the machine or place it in an airtight

location, such as a closet.
If the machine is not well-ventilated, this could result in fire.

Do not place the machine on an unstable

surface.

Make sure you plug the power cord into a grounded electrical outlet.

Otherwise, this could result in electric shock or fire.

Advertising