Make application token, E "make application – Dell S320wi Projector User Manual
Page 125
Advertising
Make Application Token
The Application Token lets you perform Plug and Show using a USB token.
NOTE:
This is only application to S320wi or a wireless-enabled S320.
1 From the application software, click
> Make Application Token.
2 The following screen appears. Click Next.
3 Plug a flash drive into any of the USB ports on your computer. Select the
drive from the list, then click Next.
4 Click Finish to close the wizard.
Using Your Projector
125
Advertising
This manual is related to the following products: