Dell S320wi Projector - Manual (Page 129)

Problem (continued) Possible Solution (continued)
TEMP light is solid amber The projector has overheated. The display
automatically shuts down. Turn the display on
again after the projector cools down. If the
problem persists, contact Dell™.
TEMP light is blinking amber If the projector fan fails, the projector will
automatically shut down. Try to clear the
projector mode by pressing and holding the
Power button for 10 seconds. Please wait for
about 5 minutes and try to power up again. If
the problem persists, contact Dell™.
The OSD does not appear on Try to press the Menu button on the panel for
the screen 15 seconds to unlock the OSD. Check the
Menu Lock on page 65.
The remote control is not The battery may be low. If so, replace with two
operating smoothly or works new AAA batteries.
only within a limited range
Troubleshooting Your Projector 129