Adjusting the projected image, Raising the projector height, Lowering the projector height – Dell S320wi Projector User Manual
Page 31
3
To power off the projector quickly, press the Power button and hold for 1 second
while the projector’s cooling fans are still running.
NOTE:
Before you turn on the projector again, wait for 60 seconds to allow the
internal temperature to stabilize.
4
Disconnect the power cord from the electrical outlet and the projector.
Adjusting the Projected Image
Raising the Projector Height
1
Raise the projector to the desired display angle, and use the front tilt
adjustment wheel to fine-tune the display angle.
2
Use the two tilt adjustment wheels to fine-tune the display angle.
Lowering the Projector Height
1
Lower the projector, and use the front tilt adjustment wheels to fine-tune the
display angle.
1
VGA-OUT
VGA-A IN
VGA-B IN
HDMI
USB-A
DOUSB
RJ45
Composite
S-Video
Mini-USB
RS232
Audio-In
Audio-Out
1
2
1
Front tilt adjustment wheel
(Angle of tilt: 0 to 4 degree)
2
1x Rear tilt adjustment wheel
Using Your Projector
31