Using your projector, Turning your projector on, Turning your projector off – Dell S320wi Projector User Manual

Page 30

Advertising
background image

3

Using Your Projector

Turning Your Projector On

NOTE:

Turn on the projector before you turn on the source (computer, DVD

player, etc.). The Power button light blinks blue until pressed.

1

Remove the lens cap.

2

Connect the power cord and appropriate signal cables to the projector. For

information about connecting the projector, see "Connecting Your Projector" on

page 13.

3

Press the Power button (see "Using the Control Panel" on page 35 to locate the

Power button).

4

Turn on your source (computer, DVD player, etc.)

5

Connect your source to the projector using the appropriate cable. See

"Connecting Your Projector" on page 13 for instructions to connect your source

to the projector.

6

By default, the input source of the projector is set to VGA-A. Change the input

source of the projector if necessary.

7

If you have multiple sources connected to the projector, press the Source

button on the remote control or control panel to select the desired source. See

"Using the Control Panel" on page 35 and "Using the Remote Control" on

page 37 to locate the Source button.

Turning Your Projector Off

CAUTION:

Unplug the projector after properly shutting down as explained in

the following procedure.

1

Press the Power button. Follow the instruction displayed on screen to properly

turn off the projector.

NOTE:

The "Press Power Button to Turn off Projector" message will

appear on the screen. The message disappears after 5 seconds or you can

press the Menu button to clear it.

2

Press the Power button again. The cooling fans continue to operate for 120

seconds.

Using Your Projector

30

Advertising
This manual is related to the following products: