Dell S320wi Projector - Manual (Page 75)

Enable Wireless on the Projector
In order to use your projector wirelessly, you need to complete the steps below:
1 Install the optional wireless module kit (optional in S320). See "Installing the
Optional Wireless Module Kit" on page 14.
NOTE: Wireless module kit embedded for S320wi.
2 Connect the power cable to the wall outlet and press the power button.
3 Press the Menu button on your projector control panel or remote control.
NOTE: Use , , and buttons to navigate and to select.
4 Access the INPUT SOURCE menu, select Wireless/USB and then select
Wireless Display on the sub-menu. See "INPUT SOURCE
WIRELESS/USB" on page 52.
Using Your Projector 75