Dell E228WFP Monitor - Manual (Page 36)

Back to Contents Page
Using Your Monitor Stand
Dell™ E228WFP Flat Panel Monitor User's Guide
Attaching the Stand
Organizing Your Cables
Using the Tilt
Removing the Stand
Attaching the Stand
1. Place the stand on a flat surface.
2. Fit the groove on the back of the monitor onto the two tabs of the stand.
3. Lower the monitor so that the monitor mounting area snaps on/locks to stand.
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management hole to
neatly organize all cables as shown above.
Using the Tilt
With the built-in pedestal, you can tilt the monitor for the most comfortable viewing angle.
NOTE: Stand is detached when the monitor is shipped from the factory.