Dell E228WFP Monitor - Manual (Page 5)

Note: Pin 1 is at the top right.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If desired, you
can select different settings, but in most cases monitor installation is automatic.
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 T.M.D.S. Data 2- 9 T.M.D.S. Data 1- 17 T.M.D.S. Data 0-
2 T.M.D.S. Data 2+ 10 T.M.D.S. Data 1+ 18 T.M.D.S. Data 0+
3 T.M.D.S. Data 2 Shield 11 T.M.D.S. Data 1 Shield 19 T.M.D.S. Data 0 Shield
4 No Pin 12 No Pin 20 No Pin
5 No Pin 13 No Pin 21 No Pin
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield
7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock +
8 No Connect 16 Hot Plug Detect 24 T.M.D.S. Clock -
General
Model number E228WFP
Screen type Active matrix - TFT LCD
Screen dimensions 22 inches (22-inch viewable image size)
Preset display area:
Horizontal 473.76 mm (18.65 inches)
Vertical 296.1 mm (11.66 inches)
Pixel pitch 0.282 mm
Viewing angle 160° (vertical) typ, 160° (horizontal) typ
Luminance output 300 CD/m ²(typ)
Contrast ratio 800 to 1 (typ)
Faceplate coating Antiglare with hard-coating 3H
Backlight CCFL edgelight system
Response Time 5ms typical
Resolution
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 75 Hz (automatic)
Optimal preset resolution 1680 x 1050 at 60 Hz
Highest preset resolution 1680 x 1050 at 60 Hz
Video display capabilities(DVI HD playback) 480p/576p/720p