Replacing the power-button board, Procedure, Post-requisites – Dell Inspiron 14 (3443, Early 2015) User Manual
Page 45: Power, Button board
Replacing the Power-Button
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Route the power-button cable through the routing guides on the palm
rest.
2 Align the screw hole on the power-button board with the screw hole on
the palm rest.
3 Replace the screw that secures the power-button board to the palm rest.
4 Adhere the tape to the power-button board.
5 Follow the procedure from step 3 to step 9 in “Replacing the
”.
Post-requisites
1
Replace the
2 Replace the
3 Replace the
4 Replace the
.
5 Replace the
6 Replace the
.
45