Replacing the i/o board, Procedure, Post-requisites – Dell Inspiron 14 (3443, Early 2015) User Manual
Page 52
Advertising
Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the I/O-board cable connector and press
down on the latch to secure the cable.
2 Turn over the I/O board and use the alignment post on the computer
base to place the I/O board in position.
Post-requisites
1
Replace the
.
2 Replace the
3 Replace the
4 Replace the
5 Replace the
6 Replace the
.
7
Replace the
52
Advertising