Dell Inspiron 14 (3443, Early 2015) - Manual (Page 70)

Removing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the battery .
2 Remove the optical drive .
3 Remove the base cover .
4 Remove the memory module(s) .
5 Remove the wireless card .
6 Remove the hard drive .
7 Remove the keyboard .
8 Remove the palm rest .
9 Remove the system board .
Procedure
1 Note the antenna cable routing and remove the cable from its routing
guides.
2 Remove the screws that secure the display assembly to the computer
base.
70