Dell Inspiron 7500 - Manual (Page 24)

Back to Contents Page
Display Assembly and Display Assembly Component Removal: Dell™ Inspiron™ 7500
Display Assembly Removal
This procedure assumes that you have removed the keyboard and thermal shield . The following procedure applies to all LCD displays (15-inch
XGA, 15-inch SXGA+, and 15.4-inch SXGA).
1. Remove the left hinge cover.
Remove the two Phillips screws on the LCD wire harness on JP3. Use a dental pick or flat-blade screwdriver to pry each end of the connector to release it.
2. Close the display.
3. Remove the (4) 6-mm screws that secure the 2 hinges.
4. Unlatch the display assembly and lift the assembly off the computer base.
Display Assembly Component Removal
Back to Contents Page
Display Assembly Removal Display Assembly Component Removal
Front Bezel Removal 15-Inch LCD Panel Removal