Replacing the system board – Dell Vostro 1200 (Early 2009) User Manual
Page 40
Replacing the System Board
1.
Carefully place the system board into the computer base.
2.
Replace the one M2.5x5-mm screws in the system board.
3.
Replace the processor (see
Replacing the Processor Module
).
4.
Replace the processor thermal-cooling assembly (see
Replacing the Processor Thermal-Cooling Assembly
).
5.
Replace the fan (see
Replacing the Fan
).
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the Mini Card (see
Mini Cards
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the hinge cover (see
Replacing the Hinge Cover
).
11.
Replace the memory module(s) (see
Replacing the Memory Module
).
12.
Replace the hard drive (see
Replacing the Hard Drive
).
13.
Replace the battery (see
Replacing the Battery
).
14.
Turn the computer over and turn it on.
Back to Contents Page
1 M2.5x5-mm screw
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.