Dell PowerEdge T310 User Manual
Page 139
Advertising
Installing System Components
139
5 Disconnect all of the cables connected to the SAS backplane including
the nSAS A cable, SAS B cable used for 3.5 inch hard drives, the backplane
power cable, and the data cable. See Figure 3-28.
6 To remove the SAS backplane, pull the blue release pin and slide the
backplane upwards.
7 Pull the backplane away from the front of the system until the securing
slots are free from the tabs on the chassis.
Figure 3-28.
Removing and Installing a SAS Backplane
1
power cable
2
SAS A cable
3
blue release pin
4
J_planar cable
5
SAS backplane
6
hard drive
3
2
4
5
6
1
book.book Page 139 Wednesday, August 19, 2009 4:40 PM
Advertising