Dell PowerEdge T310 - Manual (Page 52)

52
About Your System
Unsupported
memory
configuration.
DIMM mismatch
across slots
detected:
x,x,...
Invalid memory
configuration. Memory
modules are mismatched
in the specified slots. Ensure that the memory
modules are installed in a
valid configuration. See
"General Memory Module
Installation Guidelines" on
page 108.
Warning: A fatal
error has caused
system reset!
Please check the
system event log!
A fatal system error
occurred and caused
the system to reboot. Check the SEL for
information that was logged
during the error. See the
applicable troubleshooting
section in "Troubleshooting
Your System" on page 147 for
any faulty components
specified in the SEL.
Warning: Control
Panel is not
installed.
The control panel is not
installed or has a faulty
cable connection. Install the control panel, or
check the cable connections
between the display module,
the control panel board,
and the system board. See
"Control Panel Assembly" on
page 136.
Warning! No micro
code update
loaded for
processor n
Micro code update failed. Update the BIOS firmware.
See "Getting Help" on
page 177.
Table 1-3. System Messages (continued)
Message Causes Corrective Actions
book.book Page 52 Wednesday, August 19, 2009 4:40 PM