Dell PowerEdge T310 - Manual (Page 54)

54
About Your System
Warning Messages
A warning message alerts you of a possible problem and prompts you to
respond before the system continues a task. For example, before you format
a diskette, a message will warn you that you may lose all data on the diskette.
Warning messages usually interrupt the task and require you to respond by
typing y (yes) or n (no).
NOTE:
Warning messages are generated by either the application or the
operating system. For more information, see the documentation that accompanied
the operating system or application.
Diagnostics Messages
The system diagnostic utilities may issue messages if you run diagnostic tests
on your system. See "Running the System Diagnostics" on page 165 for more
information about system diagnostics.
Write fault
Write fault on
selected drive
Faulty USB device,
USB medium, optical
drive assembly, hard drive,
or hard-drive subsystem. Replace the USB medium or
device. Ensure that the USB,
SAS backplane, or
SATA cables are properly
connected. See
"Troubleshooting a USB
Device" on page 148,
"Troubleshooting an Internal
USB Key" on page 157,
and "Troubleshooting a Hard
Drive" on page 160.
NOTE:
For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 179.
Table 1-3. System Messages (continued)
Message Causes Corrective Actions
book.book Page 54 Wednesday, August 19, 2009 4:40 PM