Dell Adaptec U320 SCSI Raid 0 or 1 Controller Card - Manual (Page 31)

Back to Contents Page
Windows Operating System Driver Installation
Adaptec™ U320 SCSI RAID 0 or 1 User's Guide
Creating a Windows Operating System Driver Diskette
Driver Installation with Windows Operating System - Precision Workstation
Confirming Driver Installation
Update Driver
NOTE: If you wish to modify any of the default settings, please refer to RAID Configuration and Management.
Creating a Windows Operating System Driver Diskette
When you install a driver in a new system or update a driver in an existing system, you need a driver diskette.
You can use the following methods to obtain drivers:
Visit the Dell TM Support website at support.dell.com and download the latest drivers for your controller. Follow
the instructions provided with the download.
Use the drivers from the Dell OpenManage
TM Server Assistant CD or Recovery CD provided with your system.
Refer to the user documentation included with the Dell OpenManage Server Assistant CD, Recovery CD or
driver diskette for details.
Driver Installation with Windows Operating System - Precision
Workstation
To install the device driver for the Adaptec U320 SCSI RAID 0 or 1 Controller on your Dell Precision Workstation
during Windows Operating System installation:
1. Boot your system from the Dell™ Windows Operating System Recovery CD.
2. Press <F6> when a message appears requesting you to press <F6> if you need to install third party SCSI or
RAID drivers.
3. When the Windows Setup window is displayed, Press S to specify additional device(s).
4. Insert the driver diskette and press <Enter>.
5. The Windows Setup screen displays a message indicating that Setup will load support for the requested storage
devices.
6. If there are any additional devices to be installed, specify them now. When all devices are specified, continue to
the next step.