Dell PowerVault MD3000 - Manual (Page 13)

About This Guide 13
• Replace physical disks
• Modify the RAID level for a disk group
Tools Tab
• Rename a storage array
• Set or change a password
• View or enable premium features
• Turn on indicator lights
• Change enclosure ID numbers
• Set or change enclosure tags
• Set up e-mail alerts and SNMP alerts
• Synchronize controller clocks, change the network configuration, or
change battery settings
• Inherit system settings
• Change media scan settings
• Change the pre-read redundancy check settings
iSCSI Tab
• Set the authentication method supported by the target
• Define permissions for mutual authentication
• Set an alias for the target for identification
• Modify the discovery method for iSCSI targets
• Set the parameters for iSCSI host ports
• View or end iSCSI sessions
• View iSCSI statistics
NOTE: The iSCSI tab is shown only in the MD Storage Manager when the
controllers contain iSCSI host ports.
Support Tab
• Recover from a failure
• Gather support information