Removing the display-hinge cap, Installing the display-hinge cap, Removing the display assembly – Dell Precision M2800 (Early 2014) User Manual
Page 41: Display-hinge cap
Advertising
p.
q.
r.
s.
t.
After Working Inside Your Computer
.
Removing the Display-Hinge Cap
1.
Before Working Inside Your Computer
2. Remove the
3. Remove the screws that secure the display-hinge cap to the computer and remove the display-hinge
cap from the computer.
Installing the Display-Hinge Cap
1.
Align the display-hinge cap with the screw holes.
2. Tighten the screws to secure the display-hinge cap to the computer.
3. Install the
After Working Inside Your Computer
.
Removing the Display Assembly
1.
Before Working Inside your computer
2. Remove:
a.
b.
c.
d.
3. Disconnect the antenna cables connected to the WLAN card and release it from the routing channel.
Disconnect the camera cable from the system board.
41
Advertising