Dell Precision M2800 (Early 2014) - Manual (Page 50)

Installing the Display Panel
1. Connect the LVDS cable and stick the LVDS cable-connector tape.
2. Flip the display and place it in the display assembly.
3. Tighten the screws to secure the display panel to the display assembly.
4. Install:
a. display bezel
b. display assembly
c. base-corner covers
d. base cover
e. display-hinge cap
f. battery
5. Follow the procedures in After Working Inside Your Computer .
Removing the Display Hinges
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a. battery
b. display-hinge cap
c. base cover
d. base-corner covers
e. display assembly
50