Installing the display assembly, Removing the display bezel – Dell Precision M2800 (Early 2014) User Manual
Page 45
Advertising
Installing the Display Assembly
1.
Place the display assembly in its position on the computer.
2. Tighten the screws to secure the display assembly.
3. Route the LVDS cable and the camera cable through the routing channel.
4. Route the antenna cables through the routing channel.
5. Connect the antenna cables to the WLAN card on the computer.
6. Connect the camera cable to the computer.
7. Install:
a.
b.
c.
d.
After Working Inside Your Computer
.
Removing the Display Bezel
1.
Before Working Inside Your Computer
2. Remove:
a.
45
Advertising