Dell 2707WFP Monitor - Manual (Page 10)

l The Flash Memory Card Reader is automatically recognized by Windows® 2000 and XP.
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
l All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
Features
The Flash Memory Card Reader has the following features:
l Supports Windows 2000 and XP operating systems
l No Windows 9X support from Dell
l Mass Storage Class device (No drivers are required under Windows 2000 and XP)
l USB-IF certification
l Supports various memory card media
General
Performance
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different
settings; but in most cases, monitor installation is automatic.
Slot Number
Type of Flash Memory Card
1 Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus
2 Smart Media Card (SMC)
Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)
Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)
MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)
Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible)
Supported OS Windows 2000 and XP
Transfer Speed Read: 480 Mb/s (max.)
Write: 480 Mb/s (max.)