Dell 2707WFP Monitor - Manual (Page 35)

Composite
Component
Scan for Sources
Exit Menu
Select Composite input when you are using composite video connector. Push to select the composite input source.
Select Component input when you are using component video connector. Push to select the component input source.
Push to scan for available input signals.
Push to exit the OSD main menu.
COLOR SETTINGS
BACK
Color Settings Mode
(VGA/DVI-D)
Color Adjustment
Color Settings adjusts the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.
Color setting submenu for VGA/DVI-D input
Push to go back to the main menu.
To achieve the different color mode for PC and Mac.
PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsheets, Programming, Text Editors etc.).
PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Photograph Image Editing, Multimedia, Movies etc.)
PC Custom: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from '0' to '100'
NOTE:Color temperature is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue' and 'Red') favor blue and red accordingly.
Select each one to see how each range suits your eye or utilize the 'Custom Color' option to customize the color settings to your exact choice.
Color setting submenu for Video/DVI-HD input